better Electronics Job

Through classroom and field training learn the processes for: Perform requested and non-pay disconnects, adhering to Comcast procedures and safe work practices, NEC and NESC requirements, and local ordinances in order to provide requested services. Pre-wire single unit dwellings in order to provide ready hook-up capabilities. Clean, maintain and stock vehicle and equipment in order to be prepared to perform required duties. Inspect existing ground or make new ground according to the National Electrical Code

This position provides timely and quality repairs of customers' products while maintaining high customer service. Additionally, technicians promote and sell additional products and services that directly impact the profitability of the company. This position is responsible for the repair of products in the customer's home. Products repaired include: Home Appliances: Refrigeration (non-sealed systems), Cooking, Microwaves, Dishwashers, Disposers and Laundry. Please RUSH your resume to Barb Morris, Field Staffing

least 12 months of formal electronic and electronics training...Three years related work experience in the electrical or electronics industry...

Oceaneering is a global oilfield provider of engineered services and products primarily to the offshore oil and gas industry, with a focus on deepwater applications. Through the use of its applied technology expertise, Oceaneering also serves the defense and aerospace industries. Oceaneering's business offerings include remotely operated vehicles, built-to-order specialty subsea hardware, deepwater intervention and manned diving services, non-destructive testing and inspections, mobile offshore production

Job is with Quarries Division.. Job Requirements: Master Electrician license

Large family owned and operated company is currently hiring for an Overhead Crane Electrician in Chicago, Illinois. This company maintains a fleet of service trucks and installation crews in charge of crane erections and servicing. Candidates will assist in the electrical installations of these cranes across the country. **$18-24/hour **Full Time **Medical, dental, vision, and 401K Job Description: **Troubleshoot and repair overhead cranes **Working with three phase and up to 480 volt wiring **Inverters and

Company in the Hatfield, PA area currently has an immediate need for electronic assemblers. This is a 1st shift contract position. These candidates will be responsible for: -Assemble and rework major electrical components -Work off of schematic drawings -Adjust component configuration and circuit board components -Hand soldering using through hole and surface mount techniques Candidates must also pass a soldering test to achieve on site certification. If you are interested please contact Philip at 215-902-8045

We are currently hiring for an industrial electrician in Addison, IL. The position is open on first shift and is paying between $16-$20/hr depending on experience. The following are a list of requirements: Job Description: **Experience working with AC/DC controls **Experience working with 480v + **Experience working with 3 phase motors The following are a list of job benefits: *Full-time *Medical, dental, vision, and 401K *Future growth and opportunity For immediate consideration please contact Jack Schnell

At TEKsystems we provide premier staffing to some of the major Telecommunications companies across the United States. We are in constant need of reliable individuals that have an interest in developing a career in Telecommunications. We are also in need of individuals who have previous experience, with CAT 5 and CAT 6 Cables. Punch down and Termination experience is also a plus, as well as fiber optics experience. Project Managers and engineers are also in high demand. If you have experience in Telecommunications

Navy Class C school in electrical or electronics repair for the AV 8 aircraft or...A school for Aviation Electricians or Aviation Electronics Technicians or Air Force Army equivalent and...

Aerotek is currently hiring an experienced Journey Level Industrial Electrician for a manufacturing company in San Leandro, CA. Position entails installation and maintenance of existing and new industrial manufacturing equipment. Servicing conveyor systems, troubleshooting PLC's, bending rigid conduit, running and pulling wire, working with 480v and VFD's. To be considered for this position candidate must have at least 5 recent and continuous years of experience and be able to pass pre-employment written examination

TEKsystems is looking for experienced cable technicians for positions with one of our largest and most preferred clients here in Oklahoma City. Positions are likely to become contract to hire. On a day to day basis, the chosen candidates would work with a team of technicians installing a variety of cable. Candidates should have experience in commercial environments installing and testing voice and data cables. An ideal candidate will have a minimum of 1 to 3 years plus of experience in the Telecommunications

TEK systems has opportunities for reliable cable technicians level 1&2 in and around Waco, TX. Candidates should be reliable, punctual and able to lift at least 50 lbs. Experience with CAT 5 as well as any experience with fiber and copper experience and terminations is a plus. Join TEKsystems® and get your career on the fast track. As the leading technology staffing and services firm, we are passionate about deploying high-caliber IT and communications expertise. To satisfy our constant need for expertise

Aerotek Commercial Staffing is looking for a manufacturing/industrial electrician to work in Bloomfield, NJ. Ideal candidates must have industrial/manufacturing electrical work, and panel work experience. Experience with furnaces and their electrical schematics is be a huge plus. Must read blue prints, and schematics and be comfortable working in an industrial/manufacturing environment. This is a first shift position paying 20-22 dollars an hour. For immediate consideration please call or email Mike Becker at

Our client located in the Miami area is currently seeking candidates for several Fire Alarm Technician openings to work in the are of Broward and West Palm Beach. Applicants MUST have previous experience(3+ years of fire and/or burglar alarm) working in the fire alarm industry. Specific experience may include fire alarm installations and fire alarm service work. Must have fire alarm troubleshooting experience(panels; Firelite, Silent Knight, Edwards, Ademco, etc) FASA/BASA license a huge plus!! This is a

Aerotek is currently seeking a mechanical engineer to work in the R&D engineering team where they are experiencing rapid growth. The successful candidate will have 4-5 years experience as a mechanical engineer and have experience designing and developing new technology. The responsibilities include design, building prototypes, sourcing components, and developing test procedures. The ideal candidate will have: -Mechanical or Electro-Mechanical engineering degree -Experience with machine design specializing

A large manufacturing company in the San Diego, CA area is seeking Electro-Mechanical Assemblers to assist with their production and manufacturing. There are frequently openings on 1st and 2nd shifts. Job Duties include: - Electro-mechanical Assembly - Cabling and wire harnessing - Utilization of hand tools and power tools - Ability to read drawings, diagrams, and schematics Requirements: - At least 2- 3 years experience in electro-mechanical assembly - Read and understand blueprints and drawings - Must have

An Electronic Manufacturing company located in San Diego is seeking qualified electronic assemblers. Responsibilities for this position will include but not limited to 90% subassembly work 5% is final assembly and 5% is some packaging, inventory, testing and organizing the assembly room at the end of the day. Qualified candidates must be experienced with product assembly, packaging, securing palates and know how to use shipping labels. Interested candidates must email or fax resume as soon as possible.

A fast growing manufacturing company in Wakefield is hiring for Computer Technician & Assembler positions. This dynamic company is a leading producer of electronic components used for various industries. Candidates will be working in the manufacturing department assembling computers, testing, and troubleshooting. Candidates should be familiar with the following: *Computer Assembly *Component Assembly *Hand Tools *Power Tools *Testing *Troubleshooting *PC Configuration *Installation *Reading blueprints *Hubs

Immediate openings for Electronic Technicians--Openings on 1st shift paying $14/hr. Description: -Experienced electronic technician to troubleshoot and repair digital cameras. Very quiet environment ideal for bench technicians. Available to work 1st shift and ability to work some over time if needed. Requirements: -Must have soldering and de-soldering experience -Small component repair -Component level troubleshooting -Experience with micrometers, calipers, o-scopes, and some volt meters -MUST BE A TEAM PLAYER

This company located in Solon, Ohio is looking for a Electronic Assembler. This is a full-time second shift position that pays up to $15 per hour. The duties for this position include: *Assembling circuit boards *Position and align parts in specified order *Mounting subassemblies as required *Packaging assembled product *Perform on line go, no-go inspection In order to be considered for this position the ideal candidate must be able to meet all of the following requirements: *Experience in electronic assembly

Aerotek Engineering have the perfect opportunity for an entry level electromechanical or electrical engineer to join a world leader as a Electrical Field Engineer. This position entails a variety of office and field assignments involving the installation, monitoring and maintaining highly advanced geo-technical surveying equipment. Travel across the continental US is expected and you must be open to training and assignments in Europe. The ideal candidate will be proficient with computing systems, have a good

Our client is looking for an individual who contains the following skills: -knowledge of testing power supplies* -Analog and Digital circuitry experience -Trouble shooting -Experience with high voltage is a plus -3 years experience -(military experience is a plus) If interested please contact TimHippe at: thippe@aerotek.com Tel: 203-317-2537 or 1-800-546-6447 x 2537 www.aerotek.com *Please apply here and send me the most updated MS Word copy of your resume with two professional references in order to be

We currently have several openings for Soldering technicians in Blawnox, PA We are looking for candidates with a soldering background. Candidates must be able to perform SMT (Surface Mount Soldering). We have 1st shift available. Pay is $10/hr to start. Medical, dental, and vision benefits are offered. Candidates must pass a drug test and background check. To apply for this position please contact the person listed below: JILL COMPTON ***Phone: (412) 919-1010** Toll Free: (800) 450-7028 EXT. 1010 Fax

A growing company located in Cedar Park is looking to hire on new employees for long-term positions. This company is not affected by the slowing down economy and recently doubled the size of their facility. They are looking for assemblers with the following qualifications: -hand SMT soldering skills -Thru-hole soldering -printed circuit board assembly -component level soldering -mechanical aptitude This is a First Shift position guaranteed 40 hrs/wk + some over time M-F 7am-4pm Pay Rate: $10/hour starting

A client in the metro area has a Direct Placement opportunity for 2 Master Electrician's to join their team. The client is a leading manufacturer of shingles and building supplies. Master Electricians will be responsible for troubleshooting and maintaining a variety of industrial equipment ranging from palletizing equipment to machines that heat and apply the epoxy in the back of shingles. Qualified candidates must meet the following requirements: -Possess a valid MN Master Electrical License -Possess a HS Diploma

A C D C Disassembles malfunctioning instruments electronics or test equipment such as controllers transmitters...programming of PLC s and DCS Troubleshooting electronics 24 Volt equipment and instruments Installs and...

A company in Houston, TX seeks a cable technician with 2+ years experience of cable pulling, telecom installation, or video technician experience. -Will be assembling and configuring video monitoring equipment used on the toll way system. -Will be installing and configuring video and other electronic equipment/components in the toll booths. -Will be pulling cable, conduit, and wire to install monitoring equipment. -Will be working in small/tight crawl spaces and using catwalks to move within the toll booths

A growing company in Norristown, PA has immediate openings for Electronic Technicians. Responsibilities: - 2-5 years of experience - Experience with surface mount soldering and have a general knowledge of basic hand tools - Candidates should be familiar with wiring and crimping - Troubleshooting to component level - Timely and accurate completion of assignments - Practice safe work habits Positions available now for qualified candidates! Join Aerotek Commercial Staffing(SM). We employ people in light industrial

A local electronic company is looking for an experienced Test Engineer. Qualifications Include: - BS degree in Electrical Engineering or Computer Engineering. - 5 yrs related experience - Strong knowledge in program language: Microsoft Visual Studio.NET / Visual Basic software. - Test-software development experience - Interfacing lab test equipment - Familiar with software for PC based automated test equipment - Candidate must have hands on experience in test engineering - RF experience/knowledge is a plus

service industry or a two year technical electronics education with emphasis on both digital and...

With more than 300 locations and 50,000 employees in North America and Europe, our Client is one of the world's leading manufacturers and marketers of tissue, packaging, paper, pulp, building products and related chemicals. They are an indirect, wholly owned subsidiary of Koch Industries, Inc., a private company headquartered in Wichita, Kansas. The Gypsum Paper Mill located in San Leandro has an opening for an Industrial Electrical Technician who is willing to work in a safe, customer-focused environment.

A growing Aerotek Client who specializes in servicing the electrical needs to the Quad cities area is looking for several industrial electricians to join their team. Interested candidates must be familiar with: -Basic PLC programming -Electronic schematic reading -basic industrial controls -high voltage electrical safety -basic drive operation and theory. -basic electrical principles. Basic job duties would include but are not limited to : -The servicing of electrical duties to various industrial clients within

TEKsytems is looking for a PC Technician for one if clients. This project will run through February at multiple locations with time off during Thanksgiving and Christmas. The consultant must possess strong deployment and migration skills. Technicians need to demonstrate basic troubleshooting skills on desktops and laptops; Basic problem recognition on common desktop applications and operating systems; Basic network and desktop configuration and installation. Join TEKsystems® and get your career on the fast

*Must be a Journeyman Electrician licensed in the state of WA The industrial maintenance electrician must perform skilled maintenance and repair activities on buildings, grounds, equipment, furnishings, and other facilities. Work assignments may be routine in nature or involve specific maintenance or repair assignments given in the form of oral or written instruction. Work requires concentrated attention to prevent errors, which, if not detected, can result in significant losses of time and/or money; and effective

A large electronic company in Itasca is seeking experienced electronic technician to assist with repairing of LCD & Plasma monitors. We are seeking a candidate on the 1st shift and can pay $16/hour. The position will go until May 2009, but there is opportunity for a longer assignment. Candidates should be skilled in the following: *Electronic technical work (i.e. work on computers, TVs) *Solid work experience in the field ***Please contact me for further information Ashlee Shirahama Phone: 847-221-1320 Fax

Electronics experience is a plus...

Our client in Seattle, WA is looking for an Industrial Electrician. This is a great opportunity with room for growth. Responsibilities: *Electrical repairs and troubleshooting of the facility and equipment *New equipment installation *Run conduit and wiring to support plant projects *Facility repairs including lighting and heating Requirements: *Industrial Electrician with a minimum of 5 years work experience in an industrial setting *Successfully completed a recognized electrical apprenticeship program *Experience

Fire Alarm Technician - 1st shift - 7:00 to 4:00 Monday thru Friday - Currently licensed Fire Alarm Technicians are preferred - Must have experience installing or programming fire alarm systems in commercial structures - Drug and background tests required. System Certifications would be a plus. Join Aerotek Commercial Staffing(SM). We employ people in light industrial, light technical and office support positions across the nation. If you are looking for a competitive wage, solid opportunity, and a career path

Our client located in Horsham, Pennsylvania is seeking electronic assemblers/ solderers that can work under little or no supervision. Duties will include: - Mask and coat electronic assemblies per blue-print and work instructions - Assemble electronic assemblies per blue-print and work instructions and J-Std. - Hand solder per blue-print - Inspect soldering, assemblies, and wiring per blue-print - Set up and run various semi-automated and automated soldering assembly equipment Requirement - Pass and in-house

Company Information: Focuses on mission-driven research and development of custom communication systems for the U.S. Government. We specialize in rapid development and prototyping of hardware and software systems culminating in products that exceed customer expectations. Our seamlessly integrated engineering and manufacturing teams are the solution to meeting time-critical customer requirements. Description: Performs various repetitive, semi-routine assembly operations on hybrid, surface mount, and printed circuit

A mid-sized manufacturing company located in Kankakee, IL is currently looking for a maintenance electrician to join their team. Employees will be responsible for performing electrical maintenance of production equipment. Job Details: 1st shift 8 AM-4:30 PM $20 - $25/hour An ideal candidate should have the following experience: -At least 5 years of electrical maintenance work in a manufacturing environment -Ability to repair hydraulic, pneumatic and electrical systems -Proficiency in troubleshooting PLC's.

Our client takes other peoples UPSs (Uninterruptible Power Supply) and customizes them for their specific client needs. This assembly assistant will be tearing down the units that they receive and prepping wire for assembly as well as other parts. They want to start interviewing people ASAP. They want someone with experience using hand, power and pneumatic tools. The person should have experience soldering and crimping also. Preferably 1-2 years in the workforce as they would like to be able to train the person

candidates must have prior experience working with electronics and conducting QA and QC procedures Both...Ca is looking for two full time Electronics Inspectors both candidates must have prior experience...

We are currently looking for qualified electronic assemblers that have had experience soldering surface mount and through-hole. Responsibilities: - Perform electrical or mechanical assembly - Hand soldering components onto circuit cards - Wire harnessing - Assembling small components - Using small electrical hand tools and soldering iron - Must have fine manual dexterity skills and the ability to follow standard work instructions and drawings Qualified Candidates should apply immediately or contact: Travis

Our large Portland facility is currently in need of a manufacturing maintenance plant electrician. Job Requirements: -Perform repairs/maintenance on electrical components, machinery and building facilities. -The OR Limited Journeyman Manufacturing Plant Electrician License is required. -5+ years experience working in an industrial environment. Pay: -$25 - $30/hr DOE Shift: -Must be open to shift. This is a direct placement opportunity. Benefits to include medical, dental, vision, 401K, profit sharing, ect

Electronics Assembler A A company in Irvine CA has an immediate opening for an Electronics Assembler A...The Electronics Assembler A will be responsible to rework...

Aerotek Engineering is currently seeking a plant electrician for a contract-to-hire opportunity outside Park Forest. Responsibilities: *Installs, repairs, and optimizes the operation of electrical equipment in the plant. *Candidate will be working with 3-phase motors and controls, conduit and wiring, instrumentation, and other automation equipment. *Candidate will be assisting with all maintenance activities and projects. Qualifications: Must have 1-7+ years of experience with troubleshooting and debugging

A food processing facility in the Stockton/Lodi area is currently looking for Industrial Electricians. The ideal candidate must have experience working with VFD, ability to read schematic prints along with blueprints, ability to troubleshoot and repair any mechanical problems. Candidate will be responsible for maintaining, troubleshooting, installing and repairing every production equipment in the plant. The ideal candidate must have extended experience working with 440V/480V with 3-phase. Knowledge of PLC

Local company seeking computer technician to join their team. They are seeking 4 computer technicians to start immediately. MUST HAVE A+ certification. JOB DUTIES: Computer assembly, testing and troubleshooting. PC hardware support including motherboards & hard disks. Installing and Configuring software. Installation and configuration of network interface cards, hubs, and switches. Working off assembly drawings & schematics. Using basic hand tools: screwdrivers, tweezers, etc. DESIRED EXPERIENCE: Technical school