better Inspector Tester Job

Description: Vendor Surveillance Corporation (VSC) (www.vscnet.com) is a premier source of technical service personnel and information management services for Aerospace supplier base management and program performance since 1976. Our global network of quality and technical project specialists provides supplier surveillance and management, audit programs, and source inspection throughout the world, as well as the capability to provide liaison engineering functions. We have delivered millions of services-hours

Working in Clean Room Environment. Working with chemicals to add one layer of silicone to wafers. A lot of standing, operating two machines at once. Inspection, computers, and attention to detail is required. Machine Operation experience is preferred. Candidate must have an associates degree. Positions are temp to hire and must be avail to work all three shifts and weekends. Clean Room Environment experience. Will be working with chemicals. Must be able to stand for entire shift. Machine Operation

Our client is looking for mechanical inspectors. Job Description includes: Read and apply the information given on blueprints, specifications, procedures, and associated documents with minimal supervision. Must be able to inspect, using the applicable Product Assurance Procedures and associated drawings for receiving inspection. Set up standards and special purpose laboratory equipment to perform evaluation and calibration of mechanical measurement and inspection fixtures. Exhibit awareness and understanding

Working in Clean Room Environment. Working with chemicals to add one layer of silicone to wafers. A lot of standing, operating two machines at once. Inspection, computers, and attention to detail is required. Machine Operation experience is preferred. Candidate must have an associates degree. Positions are temp to hire and must be avail to work all three shifts and weekends. Clean Room Environment experience. Will be working with chemicals. Must be able to stand for entire shift. Machine Operation

e-Commerce Inspector Requisition ID 11837 Full/Part Time Full-time Location Mesquite TX Description Job Summary: Reporting to designated manager, the e-Commerce Inspector will work directly with our internet dealer base as well as supplement the ADESA auction efforts to ensure exceptional service is met at all times. The focus will be to inspect vehicles and assist e-Commerce department to increase internet business, administration of LiveBlock and DealerBlock sales, establishment of strong dealer relationships

and mechanical inspection experience Experience maintaining Quality Assurance and program related databases such as...

Mechanical Inspector Location: Littleton, MA Category: Engineering Status: Temporary/Contract Reference: US_EN_2_106004_136315 Salary: N/A Posted: November 12,2009

A manufacturer focused on the development and production of advanced technical ceramic solutions for the most demanding applications in automotive/engine, industrial wear, medical, electronic and defense industries is looking to immediately hire a qualified mechanical inspector. Candidates must possess the following: Three plus years of recent mechanical inspection experience High school diploma Familiarity with either ISO 9000 or AS 9100 Comprehension of military specification system Ability to train on 1st

Electronic Test Engineer Electrical Engineer Degree required. Distributor of Burglar, Fire, CCTV, Access, and Audio. Other job openings in sales and marketing. Send resume, salary history/requirements, to: jane.stafford@ sdepot.com Source - Charlotte Observer. Job Requirements: Please refer to the Job Description to view the requirements for this job

Our client is in need of an experienced Mechanical Inspector to inspect ceramic product that is used in the military. Job Duties: Perform mechanical inspection and test materials, parts and tooling Measure products using all types of mechanical inspection hand tools Assist with first article and final inspection Job Requirements: 3 plus years of experience doing Mechanical Inspection Familiarity with either ISO 9000 or AS 9100 This is a 2nd shift position; 2 PM to 10:30 PM Required Skills: MECHANICAL

Description: Mechanical inspection of MACHINED PARTS. CMM experience Calipers micrometers, veniers, gages etc... Blue print reading experience --------------------------------------------------------------------------------- Benefits for contract employees at Engineering Resource Group, Inc. include: - 7 paid holidays - 1 week paid vacation - 401(k) with 50% company matching and only one (1) year vesting period on company's matching portion - 33% company contribution on Aetna health insurance premiums (employee

Senior Mechanical Inspector to perform mechanical inspection on parts and assemblies to be used in a medical device. Job Responsibilities: - Duties included but not limited to: Properly recording inspection information to meet device history record requirements Interpreting drawing information for proper evaluation of part/assembly acceptance Determining the appropriate method for inspection of parts/assemblies to ensure accurate evaluation of conformance

Senior Mechanical Inspector to perform mechanical inspection on parts and assemblies to be used in a medical device. Job Responsibilities: Duties included but not limited to: Properly recording inspection information to meet device history record requirements Interpreting drawing information for proper evaluation of part/assembly acceptance Determining the appropriate method for inspection of parts/assemblies to ensure accurate evaluation of conformance

Requisition Number 4723271 Job title ECommerce QA Engineer Location Santa Clara Valley Country United States City Cupertino State/Province California Job type Full Time Job description Responsible for testing and qualification of the iTunes Music Store specifically relating to the AppStore. With a strong focus on e-commerce, Partner Tools/data streams relating to metadata updates and availability management. The ideal candidate will be experienced in content management systems and audio and video ingestion tools

Machinist MECHANICAL INSPECTOR.Perform 1st-article, in-process or final inspection. Exp. with CMM's (Mitutoyo or Brown & Sharpe) req'd. Exper. with ISO pref'd.. Burbank loc. $22-$26/hr. Call 818-840-1188 or Fax resume to 818-841-8665 Se habla espanol. Los Angeles Times 2009-11-11 Source - Los Angeles Times. Job Requirements: Please refer to the Job Description to view the requirements for this job

AutoReqId 31161BR Function Engineering Group/Division Fluid Power - Aerospace - Hydraulic Systems Division External Job Title Electrical Test Engineer - Los Angeles Job Description Working with Project Engineers and Program Managers, the candidate will be responsible for interpreting customer requirements and creating test plans, test procedures and reports to validate compliance to these requirements. Candidate will provide technical leadership with regard to functional and performance testing of electronic

Our client is seeking an Electrical Test Engineer. The responsibilities of this position include the following: - Electrical testing of automotive high speed cable assemblies, connectors, and components - Testing will utilize, but is not limited to sampling oscilloscopes, Real-Time digital oscilloscopes, pulse / pattern generations, TDR sampling heads, bit error rate testers, and network analyzers - Support or develop laboratory circuit boards and fixtures to support electrical, EMI, and EMC testing of

A large manufacturing company in San Diego is seeking a Mechanical/Receiving Inspector. Position is 1st shift and hourly rate is depending on experience. Candidate should have the following qualifications: *Work from drawings, sketches, and specifications for inspection *Perform mechanical inspection using measuring devices *Knowledge of Tooling Calibration Program, Knowledge of dimensional inspection If interested please contact Michelle Guerrero at 619-278-3071. Required Skills: READ BLUE PRINTS, INSPECTION

QA/Mechanical Inspector - 2nd shift Location: Mahwah, NJ Category: Industrial & Manufacturing Status: Temporary/Contract Reference: US_EN_2_107224_135243 Salary: N/A Posted: October 29,2009

ELECTRICAL TEST ENGINEER OPENINGS Our Client, a World Leader in their Medical industry segment currently working with new and existing leading edge technology currently searching for Electrical Test Engineers for their West Michigan facility. This is one of the most stable companies in the United States with tremendous financial performance. Attributes of the Successful Candidates: BS Electrical Engineering Degree Minimum 5 years experience with Test Fixtures, End of Line

ESEENTIAL DUTIES AND RESPONSIBILITIES: -Performs duties of Mechanical Quality Inspector as required. -Performs receiving, first piece, in-process, and final inspection of parts using measuring equipment such as: micrometers, vernier calipers, micro-hite, optical comparator and CMM. -Works with quality, engineering, and manufacturing personnel to assure effective and competent performance of quality function. -Verifies and maintains Device History Records. -Maintains the work area and equipment in a clean

Vendor Surveillance Corporation (VSC) (www.vscnet.com) is a premier source of technical service personnel and information management services for Aerospace supplier base management and program performance since 1976. Our global network of quality and technical project specialists provides supplier surveillance and management, audit programs, and source inspection throughout the world, as well as the capability to provide liaison engineering functions. We have delivered millions of services-hours of specialized

Working in Clean Room Environment. Working with chemicals to add one layer of silicone to wafers. A lot of standing, operating two machines at once. Inspection, computers, and attention to detail is required. Machine Operation experience is preferred. Candidate must have an associates degree. Positions are temp to hire and must be avail to work all three shifts and weekends. Clean Room Environment experience. Will be working with chemicals. Must be able to stand for entire shift. Machine Operation

Aerotek is currently accepting applications for a Quality Control Inspector for Kansas City, MO. Individual will be doing quality control checks on electronic boards. Individual should have previous experience with some soldering and quality control experience on PCB boards This position will pay $12.50 a hour. This position is a 4 day work week from 6 a.m. to 4:30 p.m. Requirements: - High School Diploma or GED - Good Work History - 6 months of electronic or hardware quality control experience - 2

Aerotek's preferred client, located near Waukesha Wisconsin, is actively seeking to add an Electrical Test Engineer to their staff. The client is a leader in the design and installation of production test systems in a wide range of industries. Aerotek's client has been an industry leader for over 35 years. The long term success of the company has hinged on its ability to service a diverse range of industries including Automotive, Medical and Consumer Electronics. The company is presently seeking to hire

Working in Clean Room Environment. Working with chemicals to add one layer of silicone to wafers. A lot of standing, operating two machines at once. Inspection, computers, and attention to detail is required. Machine Operation experience is preferred. Candidate must have an associates degree. Positions are temp to hire and must be avail to work all three shifts and weekends. Clean Room Environment experience. Will be working with chemicals. Must be able to stand for entire shift. Machine Operation

ESG is in search of a RF Electrical Test Engineer for a field service engineering position, based out of China Lake, Cailfornia. Must be a US citizen and be able to hold/attain a DoD secret clearance. B.S. in Electrical Engineering - Experience with RF systems and RF test and measurement equipment; - Experience working with CREW systems (algorithms used by the system, architecture of the system (HPA, switching, response to noise, etc) - Good written and spoken English communication skills; - Ability to follow

Volt has an immediate need for an IPC-610 Certified Electronic Inspector. Receiving Inspection on electronic parts/components (PCB Boards). Job Requirements: - 2 + years experience as an Electronic Inspector - Must be IPC-610 Certified - Experience with Receiving Inspection on electronic parts/components (PCB Boards) - Must be flexible to work weekends, OT, and holidays 'Volt is an Equal Opportunity Employer' Location: Orange County, CA Type: CONTRACT Duration: 90 - 120 Days Pay Rate: DOE Contact

Mechanical Inspector Job Great opportunity north of Boston for a Sr. Mechanical Inspector. This is a contract position that has the potential to go perm in the future. The right candidate will wear many hats and become part of a cohesive team at our client site. Responsibilities - Perform high quality inspection, (first, in process and final), as well as assembly and production - Responsible for machine calibration as necessary - Run milling and lathe machinery Requirements - Minimum of 4 years experience

Great opportunity north of Boston for a Sr. Mechanical Inspector. This is a contract position that has the potential to go perm in the future. The right candidate will wear many hats and become part of a cohesive team at our client site. Responsibilities - Perform high quality inspection, (first, in process and final), as well as assembly and production - Responsible for machine calibration as necessary - Run milling and lathe machinery Requirements - Minimum of 4 years experience - Experience within a

IPC-610 Certified Electronic Inspector Description: Volt has an immediate need for an IPC-610 Certified Electronic Inspector. Receiving Inspection on electronic parts/components (PCB Boards) Requirements: - 2 + years experience as an Electronic Inspector - Must be IPC-610 Certified - Experience with Receiving Inspection on electronic parts/components (PCB Boards) - Must be flexible to work weekends, OT, and holidays "Volt is an Equal Opportunity Employer" Location: Orange County, CA Type:

Brazonics, Inc. has been producing complex Heat Exchangers, Cold Walls, Chassis and Enclosures for the Aerospace and Commercial Markets since 1960. During this time period, Brazonics has evolved from a small, build-to-print Dip Braze facility to a full service Design to Specification Company. Our 41,500 square foot facility in Hampton, NH has been configured for maximum efficiency in the execution of processes. Brazonics is currently searching for the following personnel to complete our workforce: MECHANICAL

Untitled MECHANICAL INSPECTOR Opening in the Mukwonago area for a PT quality source inspector. Knowledge of ANSI specs & surface plate setups req. Fax resume: 1-877-343-9217 This listing brought to you by The Milwaukee Journal Sentinel.

TIS Mechanical Inspectors Location: Italy Job Location - City: Venice Area Req ID: 1461 Description Moody International to strengthten its database of ad-hoc/ free lance inspectors is currently seeking for individuals available for ad hoc activity in the field of Pressure Vessels, heat exchangers, Valves, Piping , Fittings. we are seeking personnel residing in the Veneto Area capable and willing to travel within reasonable radious in North of Italy. JOB DUTIES AND RESPONSIBILITIES: To review the assignment

We are working on an immediate opening for a Electronics Quality Engineer You will be responsible for the following: Monitor and control the assembly processes Evaluation of statistical data Initiate and follow-up corrective actions Analysis of customer complaints Evaluate the quality of the product in customers locations Coordinate the sorting and containment of the faulty or suspicious finished product Communicate potential problems

Electronics Quality Engineer Job ID: 3198 # Positions: 1 Location: US-MI-Farmington Hills Experience (Years): .. Posted Date: 11/5/2009 Category: .. Apply for this job: Your application choices are: Apply for this jobonline Send your resume as an attachment viae-mail Refer a friend to this job More information about this job: Overview: Our client is a Automotive Tier 1 supplier looking to add Electronics Quality Engineer to there team. This is a long term contract position Responsibilities: Experience

TAC Worldwide is in need of an Inspector to perform incoming Receiving inspection of high Reliability Spacecraft parts. - Must be able to interpret drawings and P&M specifications. - Perform receiving inspection on high reliability parts, mechanical and ID&D and visual. - Must be able to use calipers, microscopes, gauges and other inspection tools. - Must be able to interact with QE, RE, Planning and purchasing. - Computer knowledge is required. ABOUT TAC WORLDWIDE COMPANIES - www.tacworldwide

id=156327 uuid="3796EC56-8CD8-45BA-905A-1FE0F0196E19"> TEST ANNOUNCEMENT NUMBER 2009-124 ISSUED September23, 2009 Commonwealth of Pennsylvania State Civil Service Commission Examination for Bituminous Underground Mine ELECTRICAL Inspector Exam No. Job Title Job Code Pay Schedule and Range 1. Bituminous Underground Mine Electrical Inspector 71550 S8 APPLICATIONS WILL BE ACCEPTED UNTIL FURTHER NOTICE. NATURE OF WORK You will inspect electrical equipment installed and operated in and around bituminous

Responsible for all facets of first article inspections, vendor final inspections and other duties as required. Decides whether to accept or reject work at various inspection points. Must have CMM experience. Looking to fill position asap. Salary may be negotiable. Position is located in machine shop in Morgan Hill. Machinist history helpful but not necessary. Required Skills: Inspector, FIRST ARTICLE INSPECTION Join Aerotek Commercial StaffingSM. We employ people in light industrial, light technical and

Bureau Veritas - Supply Chain Management is the world's leading service provider in supply chain management, technical support and supplier quality services for a variety of industries including Aerospace, Power System/Generators, Energy, Transportation, Oil and Gas, Department of Defense and Automotive. Our dedication to our customers means we are focused on providing the very best candidates to support our customers. We are currently looking for individuals who would be interested in working with us on

Bureau Veritas - Supply Chain Management is the world's leading service provider in supply chain management, technical support and supplier quality services for a variety of industries including Aerospace, Power System/Generators, Energy, Transportation, Oil and Gas, Department of Defense and Automotive. Our dedication to our customers means we are focused on providing the very best candidates to support our customers. We are currently looking for individuals who would be interested in working with us on

Bureau Veritas - Supply Chain Management is the world's leading service provider in supply chain management, technical support and supplier quality services for a variety of industries including Aerospace, Power System/Generators, Energy, Transportation, Oil and Gas, Department of Defense and Automotive. Our dedication to our customers means we are focused on providing the very best candidates to support our customers. We are currently looking for individuals who would be interested in working with us on

Bureau Veritas - Supply Chain Management is the world's leading service provider in supply chain management, technical support and supplier quality services for a variety of industries including Aerospace, Power System/Generators, Energy, Transportation, Oil and Gas, Department of Defense and Automotive. Our dedication to our customers means we are focused on providing the very best candidates to support our customers. We are currently looking for individuals who would be interested in working with us on

Bureau Veritas - Supply Chain Management is the world's leading service provider in supply chain management, technical support and supplier quality services for a variety of industries including Aerospace, Power System/Generators, Energy, Transportation, Oil and Gas, Department of Defense and Automotive. Our dedication to our customers means we are focused on providing the very best candidates to support our customers. We are currently looking for individuals who would be interested in working with us on

Bureau Veritas - Supply Chain Management is the world's leading service provider in supply chain management, technical support and supplier quality services for a variety of industries including Aerospace, Power System/Generators, Energy, Transportation, Oil and Gas, Department of Defense and Automotive. Our dedication to our customers means we are focused on providing the very best candidates to support our customers. We are currently looking for individuals who would be interested in working with us on

Bureau Veritas - Supply Chain Management is the world's leading service provider in supply chain management, technical support and supplier quality services for a variety of industries including Aerospace, Power System/Generators, Energy, Transportation, Oil and Gas, Department of Defense and Automotive. Our dedication to our customers means we are focused on providing the very best candidates to support our customers. We are currently looking for individuals who would be interested in working with us on

Mechanical Inspector with CMM experience Needed! $15/hr! 1st shift! An manufacturer of safety equipment, located in Lawrenceville, has an immediate opening for a Senior Mechanical Inspector. The ideal candidate must have previous experience with CMM or other measuring devices and have a good mechanical aptitude. Job Duties: - Inspect incoming components (including prototypes) per drawings and component specification sheets with particular emphasis given to machined and/or molded components that

FUNCTION Under minimal supervision of the Quality Assurance Supervisor performs mechanical and visual inspection...inspection at vendor sites 6 Assists Quality Assurance during vendor audits 7 Assists in...

Inspects Incoming electronic systems, precision electro/mechanical assemblies, or mechanical assemblies and subassemblies. Determines or assists in determining methods, sequences and procedures necessary for inspection. Makes piece part accept/reject decisions on the basis of mechanical testing performed.. Job Requirements: Required Key Skills: Dimensions Electrical Test Techniques Measurement Analyst Must have experience with inspection of in-coming electronic systems, precision electro/mechanical assemblies

Location: Woburn, MA Position Mechanical Inspectors Terms: Temp or Temp to hire Salary Range: $14hr to $18hr The Davis Companies offers an outstanding benefit package including comprehensive medical coverage for our temporary employees and their dependents. And the list goes on... 401k, accrued paid-time-off, up-skill training, Workplace Banking with direct deposit, just to name a few.