better Job in South Carolina at Technical and Scientific Research Services

Radiological Control Inspector Category: Radiological Control Type: Description: Must successfully complete initial Radiological Control Inspector training requirements. Must successfully complete all required facility-specific training and qualification requirements. Experience for entry into the SGL 18 position is: 12 months with no previous related experience above SGL 16 entry requirements 11 months with 1 year previous related experience above SGL 16 entry requirements 10 months with 2 years previous

Buyer Category: Buyer Type: Description: Bachelors Degree. MBA desirable. Concentration in Business, Economics, Management, Engineering preferred. 5-8 years of direct and federal related procurement/contracts industry experience. Must be extremely knowledgeable of the requirements contained in procurement directives -- Federal Acquisition Regulations (FAR), Department of Energy Acquisition Regulations (DEAR), and Client's procedures, -- sufficient to make difficult and responsible determinations on an extensive

Subcontract Technical Representatives Category: Technical Representatives Type: Description: Bachelor's degree in a technical or non-technical field and at least of 10-15 years of related practical experience in construction or construction management, purchasing, materials management, business, or subcontract management and administration. An Associate's degree and 15-20 years of practical background or relevant experience would substitute for the higher degree requirement. A high school diploma and substantially

Field Procurement Engineer Category: Engineer Type: Description: Bachelor's degree in management, business or economics and at least 5-7 years of related experience in the areas of procurement, materials management, maintenance or operations An engineering degree and a minimum of 3-5 years of experience may be preferred depending upon the division, functional area or commodity predominantly being supported. An Associate's degree or high school diploma and a substantially greater number of years of practical

Cost Engineer Category: Engineer Type: Description: Bachelor's degree in business / construction management / technical / engineering or a related area and at least 6-8 years of practical experience in cost or related areas. An Associate's degree and 10-12 years of practical experience would be considered equivalent. A high school diploma and 15-20 years of practical experience would also be considered equivalent. A working knowledge of baseline management and funds management principles. A thorough knowledge

Industrial Hygienist Category: IH Type: Description: B.S. in Engineering, Chemistry, Biology, or related physical or biological science, or special studies and training in these disciplines and 2-6 years related experience; or M.S. in Engineering, Chemistry, Biology, or related physical or biological science and 0-2 years related experience. Has advanced technical knowledge base of IH regulations, standard concepts, practices, principles and techniques; working knowledge of pertinent IH practices and applications

Planner Category: Construction CDE Type: Description: An associates degree in a technical discipline and at least 8 - 10 years work experience or 10 - 12 years of practical work experience. Requires the thorough knowledge of advanced engineering principles and practices to develop appropriate design outputs. An in-depth knowledge of the conventional technology in the specialized field, computer applications, Industry Codes and Standards, design control, and government requirements is required. Good organizational

Safety Professional Category: Safety Type: Description: Non-technical Bachelors Degree and 10-12 years related experience, non-technical associates degree and 12-14 years related experience, or high school diploma and 14-16 years related experience Understands and applies advanced S&H theories, concepts and art; working knowledge of related disciplines. Local group recognition as an expert. Location Aiken , SC Minimum Experience (yrs): Required Education: Not Specified Benefits:

Construction Manager Category: Construction Type: Description: Bachelor's degree in an engineering or environmental discipline and at least 6-10 years combined engineering/project management experience and at least 5 years personnel management experience. Thorough knowledge of the principles and methods of multiple engineering disciplines including design and construction in addition to business disciplines such as procurement, planning, scheduling, cost/budget control. Requires considerable knowledge of government

Quality Assurance Engineer Category: QA Type: Description: MS degree in Engineering/Science with 0-2 years of Quality Assurance, Quality Control, or Engineering experience in the fields of Operations, Maintenance, Construction or Industrial Manufacturing. BS degree in Engineering/Science with 2-4 years of Quality Assurance, Quality Control, or Engineering experience in the fields of Operations, Maintenance, Construction or Industrial Manufacturing Pursuit of a degree (90 credit hours) in Engineering/Science

Training Specialist Category: Trainer Type: Description: HS Diploma with 8-10 years of specific experience consistent with the material being presented ; OR an AA degree and 5-7 years of experience in specific area of training being presented; OR a BS/BA degree and 4-6 years of training related work experience. Training Specialists need the depth and breadth of knowledge and shills of an Associate Training Specialist: In order to develop training materials, anticipate potential student difficulties, draw analogies

Training Support Category: Training Type: Description: BS/BA degree and 4-6 years of training related work experience; OR an AA degree and 6-8 years of experience in specific area of training being presented; OR a HS Diploma with 8-10 years of specific experience consistent with the material being presented. Training Specialists need the depth and breadth of knowledge and shills of an Associate Training Specialist:In order to develop training materials, anticipate potential student difficulties, draw analogies

Procedures writer Category: Procedure Writers Type: Description: Associate's degree and at least 2-4 years of practical experience in the areas of operations, or E&I /mechanical maintenance. High school diploma and at least 6-8 years of relevant experience would substitute. A basic knowledge and understanding of process fundamentals and plant systems and a basic knowledge of computer software required to generate procedures, correspondence and database changes is required. A thorough knowledge of site administrative

Engineer - Design Authority Category: Engineer Type: Description: An associates degree in a technical discipline and at least 8 - 10 years work experience or 10 - 12 years of practical work experience. Requires the thorough knowledge of advanced engineering principles and practices to develop appropriate design outputs. An in-depth knowledge of the conventional technology in the specialized field, computer applications, Industry Codes and Standards, design control, and governmental requirements is required

Start-Up Engineer Category: Engineer Type: Description: Bachelor's degree in a technical discipline plus 2 - 6 years practical work experience in startup, operations, maintenance or testing and basic knowledge of pertinent industry or regulatory standards. Some knowledge of construction or field engineering, of engineering systems, and applications of startup/test methods. Some knowledge of code, mathematics, or computers. Basic skill in communications. The above is normally acquired through a recognized degree

Senior Estimator Category: Estimator Type: Description: Bachelor's degree in engineering/technical/construction management/business and at least 6 - 8 years of experience in estimating. Fifteen years experience in nuclear, heavy industrial or process chemical construction in a field capacity with 10 years estimating, would substitute in lieu of a formal education requirement. Comprehension of engineering, procurement, construction and general business environments. Working knowledge of planning and scheduling

The Systems Engineering Group of QinetiQ North America delivers systems engineering and integration, software development, logistics information management, training systems management, information technology services, and test and evaluation support for the development, modification, fielding and sustainment of military equipment and systems. The Group's primary focus is at the operating force level and military buying commands. Our core competencies include: - Enterprise IT Services - Logistics Solutions

Criticality Safety Engineer Category: Engineering Type: Description: Navarro Research and Engineering, Inc. is recruiting for a Criticality Safety Engineer in Aiken, SC. Provide day to day facility support to H Area Hazard Category 2 nuclear facilities. Work includes direct support to operations, engineering, and other functional organizations in the role of a criticality safety engineer. Development of new or modified criticality safety documentation to support new or existing missions is a routine activity

Mechanical/Process Engineer Category: Engineer Type: Description: Provide engineering support services on assigned Client Engineering Teams. Engineering support services include engineering analysis, design development and generation of design output documents including but not limited to: Process Flow; Piping and Instrumentation Diagrams; System Descriptions; Mechanical Equipment Lists; Mechanical Equipment, Pipe, and Valve Specifications; Failure Analysis; Accident Analysis; Finite Element Analysis; ASME

2D Electrical Designer Category: Design Engineer Type: Description: Provide 2D Designer support services to assigned Client Engineering Teams. Designer support services include engineering analysis, design development, and generation of design output documents in the following area: Electrical Equipment layout Grounding Cable tray Conduit Lighting systems Schematics and wiring diagrams Working knowledge of National Codes and Standards for electrical design such as IEC, NEC

Mechanical Remoteability/Machine Design Engineer Category: Design Engineer Type: Description: Provide engineering support services on assigned Client Engineering Teams. Engineering support services include engineering analysis, design development and generation of design output documents including but not limited to: Material Handling Design; Mechanical Equipment Design; Mechanical Equipment Specifications; Failure Analysis; Finite Element Analysis; ASME Code Design and Evaluation; and Vendor Document Reviews

Nuclear Safety Engineer Category: Nuclear Engineer Type: Contractor Description: Navarro Research and Engineering, Inc. is recruiting for a Nuclear Safety Engineer in Aiken, SC. Develop nuclear safety program documentation, procedures, policies, and guidance. Review nuclear safety products (e.g., calculations, documented safety analyses) and assess implementation of nuclear safety rules and requirements. Requirements: - 5 years experience as a Nuclear Safety Engineer in a Department of Energy facility. - Experience

Civil Structural Engineer Category: Engineer Type: Description: Provide design and construction oversight of structural engineering tasks on assigned Client Engineering Teams. Structural engineering tasks include: analysis of structural systems for both static and dynamic loads using manual computation and computer programs; design of concrete structures; design of steel, aluminum, stainless steel, timber and composite structures; foundation and anchorage design; structural analysis for impact, overpressure

2D Structural Designer Category: Design Engineer Type: Description: Provide 2D Designer support services to assigned Client Engineering Teams. Designer support services include engineering analysis, design development, and generation of design output documents in the following area: Structural Concrete buildings and foundations Structural steel for supports, platforms, and buildings Rebar detailing Steel detailing Preparation of fabrication drawings Review of vendor documents

Electrical Engineer Category: Engineer Type: Description: Provide engineering services on assigned Client Engineering Teams. Engineering support services include engineering analysis, walkdowns, design development and generation of design output documents including but not limited to: Single Line Drawings; Electrical Equipment Lists; Control System Design; Electrical Equipment Specifications; Bulk Material Specifications; Circuit/Raceway/Wiring/Connection Design; Grounding; Heat Tracing; Fire Detection.

Civil Structural Analyst Category: Engineer Type: Description: Provide advanced analysis methods and design of all types of structures for normal and accident loading conditions in support of Client Project Teams. Advanced Structural analytical capabilities include: Seismic soil-structure interaction (SSI), dynamic seismic analysis (response spectra and time-history), generation of in-structure seismic amplified response spectra, tornadic winds and missile penetration, precipitation (rain, flood, snow), and

2D Designer - Plant Design Category: Design Engineer Type: Description: Provide 2D Designer support services to assigned Client Engineering Teams. Designer support services include engineering analysis, design development, and generation of design output documents in the following area: Plant Design Mechanical systems including piping, material handling, equipment and HVAC components Equipment layout, piping layout and HVAC layout based on upper tier documents Working knowledge of National Codes

3D-PDS Designer (Plant Design) Category: Design Engineer Type: Description: Provide designer services to assigned Client Engineering Teams. Designer support services include engineering analysis, 3D Modeling using Plant Design System (PDS) software, design development, and generation of design output documents including but not limited to: Piping; Layouts: Electrical Commodity Details; HVAC Duct layout; Site Layout; and Vendor Document Reviews. Requirements: Education: High School Degree is required

I&C Engineer Category: Engineer Type: Description: Provide support engineering services to assigned Client Engineering Teams. Engineering support services include engineering analysis, walkdowns, design development and generation of design output documents including but not limited to: P&IDs; Control Logics; Loop Diagrams; Instrument Indices; Setpoint Lists; Instrument and Control Valve Specifications; DCS and PLC Design; Instrument Location and Installation Design; Panel Layouts; and Vendor Document Review

The Systems Engineering Group (SEG) of QinetiQ North America provides high-value engineering, software solutions, logistics information management, flight training and IT technical support services to the U.S. Department of Defense, allied governments and select commercial partners. Comprised of legacy companies Westar Aerospace & Defense, Apogen Technologies, OSEC, ITS Corporation and ComGlobal, SEG supports its customers with the knowledge and expertise of more than 2,400 employees from 50-plus locations

Requisition Number 09-0201 Title Program Manager City Charleston State SC Country United States Minimum Experience 15 Clearance Top Secret US Citizenship Req'd Yes Description QinetiQ North America's Systems Engineering Group is looking for a qualified candidate to fill a Program Manager position who is able to ensure implementation and prescribed activities are carried out in accordance with specified objectives. The successfull candidate plans and develops methods and procedures for implementing programs,

Requisition Number 09-1360 Title Management and Program Technician City Chrleston State SC Country United States US Citizenship Req'd Yes Description QinetiQ North America is providing an intern opportunity to a candidate who is seeking skills for a new career and/or exposure to the office environment as a "Management and Program Technician." The intern will perform minor "Hardware Inventory Administrative Tasks" and other clerical tasks as assigned on a temporary basis. DSS Requirements Requires a High School

Requisition Number 08-0710 Title Program Manager City Charleston State SC Country United States Clearance Top Secret US Citizenship Req'd Yes Description QinetiQ North America's Systems Engineering Group is looking for qualified Program Manager to provide planning, coordination assistance and services, and technical advice related to the provision of operational system support services at each site. *Provide technical liaison between on-site system support services personnel and other Government parties as

Requisition Number 09-1427 Title Executive Assistant City Charleston State SC Country United States Clearance Secret US Citizenship Req'd Yes Description The Executive Assistant provides support to the Department Heads and Department members. General Duties and Responsibilities: .Performs under general direction and will function autonomously without constant instruction. .Performs diverse and advanced administrative / clerical duties for the Executive-level Manager(s) and his/her team. .Schedules and coordinates

DUTIES & RESPONSIBILITIES: - Support preparation of test plans, standard operating procedures and test reports - Support definition and design of test equipment assembly, checkout, systemization, test plan performance and trouble shooting - Assist with data reduction, analysis and compilation of test data, and provide input to final reports. Job Requirements: MINIMUM QUALIFICATIONS: - B.S. Chemical Engineer / Mechanical Engineer with two or more years experience - May substitute equivalent experience

DUTIES & RESPONSIBILITIES: -Oversee preparation of test plans, standard operating procedures and reports for process-equipment reliability and maintainability testing in the Aiken, SC area -Manage task providing engineering support, including equipment assembly, checkout, systemization, and performance testing and equipment trouble shooting, work with Salt Waste Processing Facility (SWPF) team members to integrate lessons learned in SWPF operating procedures -At completion of testing, transition

Waste Management Engineer Category: Engineer Type: Contractor Description: Navarro Research and Engineering, Inc. is recruiting for anWaste Management Engineerin Aiken, SC. This position will support the waste management aspects of ARRA projects Requirements: - BS degree in Science or Engineering, preferably MS - At least 15 years experience in environmental remediation and waste management; specifically waste characterization, waste profiles, manifesting, waste transportation and interface with TSDFs - At

Environmental Compliance Engineer Category: Engineer Type: Contractor Description: Navarro Research and Engineering, Inc. is recruiting for anEnvironmental Compliance Engineerin Aiken, SC. This position will support the environmental compliance aspects of ARRA projects Requirements: - BS degree in Science or Engineering, preferably MS - At least 20 years experience in preparing regulatory (CERCLA, RCRA, CWA and CAA) documents (work plans, RI/FS, RD and RA reports) and permits (RCRA Part B, NPDES and Air Emissions

Assessment Coordinator Category: Engineering Type: Employee Description: Navarro Research and Engineering, Inc. is recruiting for aAssessment Coordinatorin Aiken, SC. - Development and maintenance of integrated assessment schedules - Assisting in the scoping, development, and execution of assessments and assessment documentation - Logistical coordination of organizational activities - Development and maintenance of a organizational action item data bank - Preparation of organizational related communications

Requisition Number 08-0435 Title Technical Support Specialist I - II - III City Charleston State SC Country United States Clearance Secret US Citizenship Req'd Yes Description Candidates for this position will be subject to a government background investigation and must meet eligibility requirements for access to classified information. US Citizenship required. Applicant will support the EPLRS Project Officer by providing EPLRS radio set and ENM training to USMC units. Applicant will be required to conduct