better Manufacturing Job in Texas

Manufacturing company in South East Houston is now accepting all experienced CNC Machinist...

A company in Houston is looking for flux core welders who can pass a 6gr weld test to start immediately. Candidates will have to pass a G R weld test that consists of welding a pipe to a plate on a 45 degree angle. Interested candidates call Wade Killian @ 713-934-1948 immediately. Join Aerotek Commercial Staffing(SM). We employ people in light industrial, light technical and office support positions across the nation. If you are looking for a competitive wage, solid opportunity, and a career path to success

Aerotek has recently partnered with a mechanical sub contractor in the Dallas, TX area. There is an immidiate opening for a pipefitter in Denton, TX. Responsibilities Include: Studying building plans to determine installation process Inspecting the structure Bending Pipes Qualifications: 2+ years of commercial or industrial pipefitting experience Must be able to read blue prints Qualified Candidates can call Kayla at 972-348-1825 or email resumes to kleonard@aerotek.com Join Aerotek E & E(SM). We specialize

A major flavoring manufacturer in Carrollton is currently hiring for mixing machine operators. This company produces spices and seasonings for the commercial food industry. This position will start out in the mixing production room, and will progress through all parts of the production facility. Eligible Candidates: - Must have experience operating a production machine - Food preparation experience preferred - Must be able to lift and carry 50 lbs regularly Candidates must be able to pass a drug test. Shift

A large manufacturing company in West Fort Worth is currently looking for CNC Mill Lathe machinists...

shift machinist opening with a clean established manufacturing firm located in the Cedar Park area...

Currently seeking candidates for an immediate Manual Machinist opening in Cedar Park with a clean well established manufacturing facility...

seeking experienced production workers in their Arlington Texas location...

Bend stainless tubing as per schematic. Fabricate connections. Run tubing in trays (extremely neat and detailed). Must know formulas for cutting and bending tubing. Will connect with pre-calibrated instruments. Class B or Class A classification needed. Position requires experience with oil and gas industry. Location: Northwest Houston Hours: 1st shift Pay: $19-21/hr Contact: Chris Delaney at 713-934-1919 Call not just apply to the posting. Must have experience to qualify. Join Aerotek

A large company in Southwest Fort Worth is currently looking for ASME Flux/Mig Welders for their 1st shift with pay ranging from $18.00 - $20.00/hr. Candidates must be able to work overtime. Qualification/Requirement: Must be a able to pass a 6G weld test. Must be a able to read blueprints and weld symbols. Must be a able to pass a drug screen. Must be a able to operate an overhead crane. If you or anyone you know if interested in this position please send your resume to rmartine @ aerotek. com or call Rick

Instrument fitter will be working in the NW part of Houston. Must have at least 2 years experience instrument fitting. $18-21 an hour. If interested contact: Jonathan Nelson 713-934-1968 Join Aerotek Commercial Staffing(SM). We employ people in light industrial, light technical and office support positions across the nation. If you are looking for a competitive wage, solid opportunity, and a career path to success, contact us now! We offer comprehensive benefits to include medical, dental, optical, and optional

A well established manufacturing company in the Carrollton area is immediately...

Will be doing set up editing and operating a manual mill manufacturing pressure sensor housings...

A manufacturing company in the Southwest Dallas area is looking to hire diesel mechanics and mechanical assemblers...Candidates are responsible for re manufacturing large trucks...

Manufacturing company in North Houston is seeking experienced welder fitters...

Our client in the manufacturing industry is seeking a qualified tig welder for a position in Cedar Park TX...

and programmable displays is looking for a Manufacturing Engineer to add to their team...as machine shop processes 2 years of Manufacturing Engineering experience PRINCIPLE DUTIES Design of assembly...Generates or approves manufacturing assembly methods and manufacturing rework instructions as required...

Immediate openings for mechanical assemblers in the Richardson area. Looking for candidates who have mechanical assembly experience in a clean room environment. The position consists of inspecting, cleaning and assembling optical lenses. Optical experience is a plus. The position is a 2nd shift 2:30-11PM and the pay is $13hr. For more information, please contact Valerie Beane @ 972-348-1831. Join Aerotek Commercial Staffing(SM). We employ people in light industrial, light technical and office support positions

Manufacturing company in South East Houston is now accepting all experienced applicants for openings in their Manual Machining Department...

for implementing continuous improvement processes Apply lean manufacturing methods In charge of overseeing budget and...

Austin TX with a Fortune 500 electronics manufacturing client...

A company in Sugar Land, TX is looking for a welder with 5+ years experience. -Must be qualified to ASME section IX procedures using GTAW, GMAW, and FCAW. -Must be able to layout, fit, tack, and weld on their own to close tolerances. -Must be able to weld different alloys including stainless steel, carbon steel, copper nickel, aluminum, etc. -Must be able to work from shop drawings using special fixtures and work instructions to fabricate items such as tanks, heat exchangers, piping, etc. -Piping must meet ASME

Manufacturing Company in Garland TX is seeking to hire a CNC Programmer...

Looking for an aircraft welder with A&P license to go to Iraq. The candidate needs to have extensive welding experience on aircraft. Solid candidates must have welding certification. The candidate needs to have an active secret clearance or the ability to get a secret clearance, and a passport. Housing and transportation are provided. MUST BE WILLING TO DO A 12 MONTH COMMITMENT. Join Aerotek Aviation, LLC(SM). We specialize in placing mechanics, technicians, engineering field support and specialized personnel

An aerospace manufacturing client in Dallas Fort Worth Texas is looking for CNC MasterCAM Programmer for an immediate need... Provide input to manufacturing engineers in selection of cutting tools and...

A large Aerospace and Defense company in the Dallas area is looking for High Speed, Multi-Axis Mill Machinists. Candidates must have GD&T experience along with CAM programming experience. A minimum of 5 years experience Programming Vertical or Horizontal machines. Join Aerotek Commercial Staffing(SM). We employ people in light industrial, light technical and office support positions across the nation. If you are looking for a competitive wage, solid opportunity, and a career path to success, contact us now!

Business Name Bell Helicopter Textron Function Program Manufacturing Work Performed Set up and operate all...

Act and obtain or have obtained a Texas Welders Card...Texas Commissioner of Labor pursuant to the Texas Welding Act and obtain or have obtained...be tested qualified and certified by the Texas Commissioner of Labor pursuant to the...as when welding in the State of Texas is required the successful candidate shall be...

Adecco, the world leader in workforce solutions, is currently hiring for Level II Solders. The Level II Solder will perform the following duties: 'Set up, operate, and maintain hand soldering equipment 'Solders and repairs PTH & SMT solder joints 'Responsible for wire-add operations The Level II Solder will have the following experience and requirements 'Knowledge of soldering IPC 610 standards 'Understand electro-mechanical assembly 'Experience with Siemens machines a plus 'Precise hand-eye coordination

A large manufacturing company in Dallas is looking for an experienced CNC machinist...

Term City Town Austin State Province Region Texas Country United States Job Description Responsible for...Area of Interest Process Engineering Job Title Manufacturing Engineering Program Manager Intern Coop Student Term...approach to leading process improvements outside of manufacturing areas...

and suspensions within the parameters of Good Manufacturing Practices cGMPs by established quality standards and...Compounder Assoc Waco Position Number 50072326 Department Manufacturing Location Waco TXDescription Responsible for the compounding...

We currently have 3 immediate openings for Panel Wire Assemblers in the Carrollton area. Must have experience with panel wiring. 1st shift $15-16/hr For questions or to apply please call Paige Greene at (972)348-1804. Join Aerotek Commercial Staffing(SM). We employ people in light industrial, light technical and office support positions across the nation. If you are looking for a competitive wage, solid opportunity, and a career path to success, contact us now! We offer comprehensive benefits to include

An large manufacturing company in Fort Worth is currently looking...

A manufacturing company in Tomball TX is looking for a structural fitter to start immediately...

A growing company located in Cedar Park is looking to hire on new employees for long-term positions. This company is not affected by the slowing down economy and recently doubled the size of their facility. They are looking for assemblers with the following qualifications: -hand SMT soldering skills -Thru-hole soldering -printed circuit board assembly -component level soldering -mechanical aptitude This is a First Shift position guaranteed 40 hrs/wk + some over time M-F 7am-4pm Pay Rate: $10/hour starting

A large Aerospace and Defense company in the Dallas area is looking for skilled Jig Bore Machinist. Candidates must have a minimum of 6 years with vertical or horizontal Jig Bore machines. Knowledge of GD&T is required along with software programming skills. Join Aerotek Commercial Staffing(SM). We employ people in light industrial, light technical and office support positions across the nation. If you are looking for a competitive wage, solid opportunity, and a career path to success, contact us now! We offer

A company in Houston, TX is seeking candidates with 1-2 years of SN 96/HMP soldering experience. Must be able to read schematics and have knowledge of resistors and capacitors. Candidates must understand IPC 610 Standards, wetting and flux and need to be able to coat the soldering iron tip. Join Aerotek Commercial Staffing(SM). We employ people in light industrial, light technical and office support positions across the nation. If you are looking for a competitive wage, solid opportunity, and a career path

A leading manufacturer of medical equipment in Carrollton, TX is currently hiring for soldering technicians. This position may be in initial assembly or for refurbishing. Candidates must have soldering certification and be able to provide documentation of certification to be considered for this position. Candidates Must: - Be familiar with SMT and thru hole hand soldering techniques - Have soldering certification documentation - Have experience in electrical assembly - Associates degree in electronics a plus

A company in northwest Houston is looking for mechanical assemblers to start immediately. This company specializes in the production of oil field skids. Essential Duties & Responsibilities: - Aligns and grouts and/or shims most complex compressors, engines and other equipment using dial indicator and laser alignment tool method, being able to work to closest tolerances - Installs compressor cylinders, pistons and valves, check clearances by using dial indicators, feeler gauges, dial calipers, inside and outside

oil and gas equipment is seeking a Manufacturing Engineer to join their team...company that specializes in the design and manufacturing of oil and gas equipment is seeking...Minimum Requirements Bachelor s Degree in Manufacturing or Industrial Engineering Experience with any CAD...

Manufacturing company in North Houston is seeking Injection Mold Operators for their second and third shifts...

Plano TX with a Fortune 500 electronics manufacturing client...

The candidate will be working in the Northwest side of Houston. Must have experience in using ISO and P&ID. Must have at least 2 years experience in pipe fitting. Pay: $17-20/hr Hours: 6:00AM-4:30PM(50-60 hours a wk) Location: Northwest Houston If interested please contact: Jonathan Nelson 713-934-1968 Join Aerotek Commercial Staffing(SM). We employ people in light industrial, light technical and office support positions across the nation. If you are looking for a competitive wage, solid opportunity

Will be tig welding on stainless steel structure Will also be welding Tig on pipe as well Must be able to read Blueprints Join Aerotek Commercial Staffing(SM). We employ people in light industrial, light technical and office support positions across the nation. If you are looking for a competitive wage, solid opportunity, and a career path to success, contact us now! We offer comprehensive benefits to include medical, dental, optical, and optional 401k. Don't put your career in the hands of just anyone, put

Manufacturing company needs 3 CNC machinists on vertical...

A leading manufacturing company in the Dallas Ft...This is a good opportunity for someone looking to continue their career in a manufacturing environment...

A manufacturing company in Tomball TX is looking for a pipe fitter...

A large manufacturing company in Irving is looking for an experienced manual machinist...

Structural Fitter/Welder Structural fitter will be fitting carbon steel in preparation for welder. Position requires the ability to read ISO's and shop prints, lay out materials and weld them. Must be able to convert standard metric measurements (decimals/fractions). Must have experience with and able to measure, cut, lay out and fit materials. Must be able to pass 3G weld test on 1" plate. Pay: $17- 20 Hours: 2 positions available 1 day/ 1 night available Location: Northwest Houston Contact: Chris Delaney at